The IP address 192.168.0.8 is used to access your router’s settings for changing the Wi-Fi password, Network Name (SSID), and other default modem or router configurations via http://192.168.0.8.
How to Log In to 192.168.0.8
- Open a web browser and type http://192.168.0.8 in the address bar.
- Enter the Username and Password, then click Login.
You will be logged into the router’s settings page.
Note: The router’s IP address, Username, and Password are typically found on a sticker located on the back of your modem or router.
Default Login Credentials for 192.168.0.8
- Username: admin
- Password: admin (or password / leave blank, depending on the router)
(Check the label on your router for confirmation.)
How to Change Your Wi-Fi Password and Network Name
- Log in to your router’s settings.
- Navigate to the Wireless, WLAN, or Wi-Fi Settings section.
- In the Network Name (SSID) field, enter your preferred Wi-Fi Network Name.
- In the Wi-Fi Password (or Passphrase/Pre-Shared Key) field, enter your new Wi-Fi password.
- Click Save or Apply to apply the changes.
If you have a dual-band router, make sure to configure both the 2.4 GHz and 5 GHz network settings separately.
Each router brand and model may have slightly different procedures for changing wireless settings. You can search for instructions specific to your router brand.
Troubleshooting Access to 192.168.0.8
To access 192.168.0.8, ensure your device is connected to the router’s Wi-Fi network. Check your connection and try again.
If you’re using a VPN or a custom IP range, you may need to find your router’s correct IP address. Clear your browser’s cache and cookies, or try accessing the page from a different browser.
If you are still unable to connect, perform a factory reset to restore the router to its default settings:
- Press and hold the Reset button for 3-5 seconds until the LEDs begin flashing.
- Release the reset button and wait for the router to reboot with factory default settings.