The private IP address 192.168.1.110 is used to access your router’s settings, where you can change the Wi-Fi password, Network Name (SSID), and other modem/router settings at http://192.168.1.110.
How to Log In to 192.168.1.110
- Open a web browser and enter http://192.168.1.110 in the address bar.
- Enter your Username and Password, then click Login.
After logging in, you will be directed to the router’s settings page.
Note: The router’s IP address, Username, and Password are usually printed on a sticker located on the back of your modem/router.
Default Login Credentials for 192.168.1.110
- Username: admin
- Password: admin
- Username: admin
- Password: password
- Username: admin
- Password: (leave blank)
(Refer to the label on your router for confirmation.)
How to Change Your Wi-Fi Password and Network Name
- Log in to your router’s settings.
- Navigate to the Wireless, WLAN, or Wi-Fi Settings section.
- Enter your desired Wi-Fi Network Name (SSID).
- Set a new Wi-Fi Password in the Wi-Fi Password/Passphrase/Pre-Shared Key field.
- Click Save or Apply to confirm your changes.
If you have a dual-band router, make sure to configure both the 2.4 GHz and 5 GHz network settings.
Since each router model may have slightly different instructions for changing wireless settings, check for specific guides based on your router brand.
Troubleshooting Connection to 192.168.1.110
Ensure that your device is connected to the router’s Wi-Fi network to access 192.168.1.110. If you’re having trouble, verify your network connection and try again.
If you’re using a VPN or a custom IP range, find your router’s correct IP address and enter it into the address bar.
Try clearing your browser’s cache and cookies, or attempt to access 192.168.1.110 using a different browser.
To reset your router to factory settings, press and hold the Reset button for 3-5 seconds until the LEDs flash. Release the button and allow the router to reboot with its default settings.