192.168.1.22

192.168.1.22 is the private IP address used to change your Wi-Fi password, Network Name (SSID), and modify your modem/router’s default settings. To access the settings, type http://192.168.1.22 into your browser’s address bar.

How to Log In to 192.168.1.22

1. Open a web browser and type http://192.168.1.22 into the address bar.
2. Enter the required Username and Password, then click Login.

Once logged in, you will have access to the router’s settings.

Note: The router’s IP address, along with the default Username and Password, are typically listed on a sticker on the back of your modem or router.

Default Login Credentials

• Username: (depends on the model)
• Password:
  • admin
  • admin
  • admin (check the router label)
  • admin (password)
  • admin (leave blank)

How to Change Your Wi-Fi Password and Network Name (SSID)

1. Log in to your router’s settings page.
2. Navigate to the Wireless, WLAN, or Wi-Fi Settings section.
3. Enter a new Wi-Fi Network Name (SSID).
4. Set a new Wi-Fi Password (also called Passphrase or Pre-Shared Key).
5. Click Save/Apply.

If your router supports dual-band (2.4 GHz and 5 GHz), make sure to configure both network settings.

Since different router models and brands may have varying processes for changing wireless settings, you can search for instructions specific to your router’s brand for more guidance.

Troubleshooting: Unable to Connect to 192.168.1.22?

• Ensure your device is connected to the router’s Wi-Fi network and try again.
• If you are using a VPN or a customized IP range, you may need to identify the router’s actual IP address. Enter http:// in the address bar instead.
• Clear your browser’s cache and cookies, then try accessing 192.168.1.22 again. Alternatively, try using a different web browser.
• To reset the router to its factory settings, press and hold the Reset button for about 3-5 seconds until the LEDs begin flashing. Release the button and wait for the router to reboot to its default settings.