192.168.178.30 is the private IP address used to change your Wi-Fi password, Network Name (SSID), and adjust your modem or router’s default settings. To access the settings, type http://192.168.178.30 into your browser’s address bar.
How to Log In to 192.168.178.30
- Open a web browser and type http://192.168.178.30 in the address bar.
- Enter the Username and Password, then click Login.
Once logged in, you will be directed to the router’s settings.
Note: The router’s IP address, along with the default Username and Password, are typically listed on a sticker on the back of your modem or router.
Default Login Credentials
- Username: (depends on the model)
- Password:
- admin
- admin
- admin (check your router label)
- admin (password)
- admin (leave blank)
How to Change Your Wi-Fi Password and Network Name (SSID)
- Log in to the router’s settings page.
- Navigate to Wireless, WLAN, or Wi-Fi Settings.
- Enter the desired Wi-Fi Network Name (SSID).
- Set your Wi-Fi Password (also known as Passphrase or Pre-Shared Key).
- Click Save/Apply.
If your router supports dual-band (2.4 GHz and 5 GHz), make sure to configure both network bands.
Different router models may have slightly different steps for changing wireless settings. To find specific instructions for your router’s brand, you can search for your router model online.
Troubleshooting: Unable to Connect to 192.168.178.30?
- Ensure that your device is connected to the router’s Wi-Fi network. Check your connection and try again.
- If you are using a VPN or a customized IP range, you may need to locate the router’s specific IP address and type http://.
- Clear your browser’s cache and cookies, then try again. Alternatively, try accessing 192.168.178.30 in a different browser.
- To reset the router to its factory settings, press and hold the Reset button for 3-5 seconds until the LEDs begin flashing. Release the button and wait for the router to reboot with its default settings.