The IP address 192.168.0.20 is used to access your router’s settings, where you can modify the Wi-Fi password, Network Name (SSID), and other default modem or router configurations via http://192.168.0.20.
How to Log In to 192.168.0.20
- Open your web browser and enter http://192.168.0.20 in the address bar.
- Enter the Username and Password, then click Login.
You will be logged into your router’s settings page.
Note: The router’s IP address, Username, and Password are usually found on a label on the back of your modem or router.
Default Login Credentials for 192.168.0.20
- Username: admin
- Password: admin (or password / leave blank, depending on the router)
(Check the label on your router for verification.)
How to Change Your Wi-Fi Password and Network Name
- Log in to your router’s settings.
- Navigate to the Wireless, WLAN, or Wi-Fi Settings section.
- In the Network Name (SSID) field, enter your desired Wi-Fi Network Name.
- In the Wi-Fi Password (or Passphrase/Pre-Shared Key) field, input your new Wi-Fi password.
- Click Save or Apply to save the changes.
If you have a dual-band router, you will need to configure both the 2.4 GHz and 5 GHz settings.
Each router brand and model may have a slightly different method for changing settings. You can search for specific instructions based on your router’s brand.
Troubleshooting Access to 192.168.0.20
To access 192.168.0.20, make sure your device is connected to the router’s Wi-Fi network. Double-check your network connection and try again.
If you are using a VPN or a custom IP range, you may need to find your router’s actual IP address. Clear your browser’s cache and cookies, or attempt to access the address from a different browser.
If you are still unable to connect, performing a factory reset will restore the router to its default settings:
- Press and hold the Reset button for 3-5 seconds until the LEDs flash.
- Release the button and wait for the router to reboot to its default factory settings.