192.168.1.17

Accessing Router Settings via 192.168.1.17

192.168.1.17 is the private IP address used to change your Wi-Fi password, Network Name (SSID), and adjust default modem/router settings. To access the router settings, type http://192.168.1.17 in your browser’s address bar.

How to Login to 192.168.1.17

1. Open a web browser and type http://192.168.1.17 in the address bar.
2. Enter your router’s Username and Password, then click Login.

Once logged in, you will have access to the router settings.

Note: The router’s IP address, along with the Username and Password, are usually found on a sticker on the back of your modem or router.

Default Login Credentials

• Username: (varies by model)
• Password:
  • admin
  • admin
  • admin (check your router label)
  • admin (password)
  • admin (leave blank)

How to Change Wi-Fi Password and Network Name (SSID)

1. Log in to your router’s settings.
2. Navigate to the Wireless, WLAN, or Wi-Fi Settings section.
3. Enter your desired Wi-Fi Network Name (SSID).
4. Set your Wi-Fi Password (also called Passphrase or Pre-Shared Key).
5. Click Save/Apply.

If your router supports dual-band (2.4 GHz and 5 GHz), be sure to configure both frequency bands.

Each router brand or model may have slightly different steps for changing wireless settings. You can look up instructions specific to your router brand and model for detailed guidance.

Troubleshooting: Unable to Connect to 192.168.1.17?

• Ensure your device is connected to the router’s Wi-Fi network. Check your connection and try again.
• If you are using a VPN or customized IP range, you may need to find your router’s specific IP address. Try entering http:// instead.
• Clear your browser’s cache and cookies, then try again, or use a different web browser.
• To reset the router to its default settings, press and hold the Reset button for 3-5 seconds until the LEDs start flashing. Release the button and wait for the router to reboot to its factory default settings.