The IP address 192.168.1.25 is used to access the router’s settings, allowing you to change the Wi-Fi password, Network Name (SSID), and other default modem or router configurations via http://192.168.1.25.
How to Log In to 192.168.1.25
- Open your web browser and enter http://192.168.1.25 in the address bar.
- Enter your Username and Password, then click Login.
You will then be logged into the router’s settings page.
Note: The router’s IP address, Username, and Password are usually found on a sticker located on the back of your modem or router.
Default Login Credentials for 192.168.1.25
- Username: admin
- Password: admin (or password / leave blank, depending on your router)
(Check the label on your router for confirmation.)
How to Change Your Wi-Fi Password and Network Name
- Log in to the router’s settings.
- Go to the Wireless, WLAN, or Wi-Fi Settings section.
- In the Network Name (SSID) field, enter the desired Wi-Fi Network Name.
- In the Wi-Fi Password (or Passphrase/Pre-Shared Key) field, input your new Wi-Fi password.
- Click Save or Apply to save your changes.
If you have a dual-band router, ensure that you configure both the 2.4 GHz and 5 GHz settings separately.
Each router brand and model may have a slightly different process for changing wireless settings. You can search for instructions specific to your router brand.
Troubleshooting Access to 192.168.1.25
To access 192.168.1.25, make sure your device is connected to the router’s Wi-Fi network. Verify your connection and try again.
If you’re using a VPN or have a customized IP range, you may need to find your router’s correct IP address. Clear your browser’s cache and cookies, or try accessing the address from a different browser.
If you still can’t connect, perform a factory reset to restore the router to its default settings:
- Press and hold the Reset button for 3-5 seconds until the LEDs begin flashing.
- Release the reset button and wait for the router to reboot with factory default settings.