Accessing Router Settings via 192.168.178.100
192.168.178.100 is the private IP address used to modify your Wi-Fi password, Network Name (SSID), and adjust your modem/router’s default settings. To access these settings, type http://192.168.178.100 into your browser’s address bar.
How to Log In to 192.168.178.100
- Open a web browser and type http://192.168.178.100 in the address bar.
- Enter the Username and Password, then click Login.
After logging in, you will be taken to the router’s settings page.
Note: The router’s IP address, along with the Username and Password, can typically be found on a sticker on the back of your modem/router.
Default Login Credentials
- Username: (varies by model)
- Password:
- admin
- admin
- admin (check your router label)
- admin (password)
- admin (leave blank)
How to Change Your Wi-Fi Password and Network Name (SSID)
- Log in to the router’s settings page.
- Navigate to Wireless, WLAN, or Wi-Fi Settings.
- Enter your desired Wi-Fi Network Name (SSID).
- Set a new Wi-Fi Password (also known as Passphrase or Pre-Shared Key).
- Click Save/Apply to confirm the changes.
If you have a dual-band router, ensure you configure both the 2.4 GHz and 5 GHz settings.
Each router model may have different steps for changing wireless settings. You can find specific instructions for your router model by searching for it online.
Troubleshooting: Can’t Connect to 192.168.178.100?
- Make sure your device is connected to the router’s Wi-Fi network. If not, check your connection and try again.
- If you’re using a VPN or a customized IP range, locate your router’s specific IP address and try http://.
- Clear your browser’s cache and cookies, then try again. Alternatively, use a different web browser.
- To reset your router to its factory default settings, press and hold the Reset button for 3-5 seconds until the LEDs begin flashing. Release the button and wait for the router to reboot with its default settings.